Albuquerque Balloon Fiesta, NM – Wednesday October 2, 2019

We are here for the fourth year.

Today’s drive was 68 miles.

We are parked in a different area and much worst then last year. We started out of level from side to side by 6 inches. With blocks we get from the parking volunteers we got to level. One of the parking volunteers gave me a ride back to the front registration area where they had the blocks. They said one block was $1.00 if I took 15 ( half of what they had) they were free. Sooner they were gone the less they had to deal with.

Here is where we are this year.

The red dot is about where we were last year.

Last week on the local news the mayor was talking about what a great thing he had done by adding more parking at the launch field.

This is the additional launch field parking. The city took this level area and made it car parking.

Oh well.

On to the generator problem. The Cummins guy got here at 12:30 and explained what he believed happened. Bottom line he thinks the generator is just fine.

Here is what he said happened. The error code is #14, OVERFREQUENCY FAULT. When the generator was running and I shut off both A/C units at the same time while operating at 60Hz the generator can spike to over 90Hz. Any time the generator goes over the 60Hz (said what the exact tolerance is but I forgot) for 6 seconds the generator will shuts down. He said to shut down one A/C at a time to help the generator stay stable at 60Hz. He also said it is best to let the generator run for for 20-30 minutes after running it under a load to let it cool down. We had a group of 8 guys setting around waiting for the technician to arrive and hung around and answered every bodies questions. Cummins is here for the fiesta to do service and answer questions.

2 thoughts on “Albuquerque Balloon Fiesta, NM – Wednesday October 2, 2019”

  1. Sounds like an adventure. Do you know where you will be from the 22 to 29. Bobbi and I are going to be in Chandler that week.

Comments are closed.